FixVault
Home › Suzuki › 2012 › Equator Base › Repair and Diagnosis › External Pages › Different car › Section 43 (Engine Lubrication System) › Repair Instructions › Engine Oil Pressure Sensor and/or Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Oil Pressure Sensor
G04842495Courtesy of SUZUKI OF AMERICA CORP.
  1. Turn the ignition OFF.
  2. Disconnect the oil pressure sensor electrical connector.
  3. Remove the oil pressure sensor (1).
About FixVault