FixVault
Home › Suzuki › 2012 › Equator RMZ-4 › Repair and Diagnosis › Transmission › Automatic Transmission System › Repair Instructions › Shift Control System: Removal and Installation › Removal

Shift Control System: Removal and Installation: Removal

  1. Remove the A/T finisher. Refer to [CENTER CONSOLE ASSEMBLY: EXPLODED VIEW ]
  2. Disconnect the following from the shift selector assembly.
    • Shift selector control cable
    • Key interlock cable
    • Shift selector connector
  3. Remove the shift selector assembly.
About FixVault