Yaw Rate Inspection
- Check yaw rate/G sensor installation condition.
- Connect SUZUKI scan tool to DLC (1) with ignition switch OFF.
Special Tool
(A): SUZUKI scan tool (SUZUKI-SDT)
- Turn ignition switch to ON position and select menu "Data List" mode of SUZUKI scan tool. Refer to scan tool operators manual for further details.
- Check "Yaw rate sensor" under "Data List" of SUZUKI scan tool in the following vehicle conditions:
- Parking condition
- Drive vehicle in right turning condition with steering wheel fully turned
- Drive vehicle in left turning condition with steering wheel fully turned
If yaw rate condition is out of specification, replace yaw rate/G sensor.
Yaw rate specification
YAW RATE SPECIFICATIONVehicle condition Yaw rate Parking 0 ± 4 deg/s Right turning 30 ± 4 deg/s Left turning -30 ± 4 deg/s