Front Wheel Speed Sensor Removal and Installation: Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reference: FRONT AND REAR WHEEL SPEED SENSOR INSPECTION

Reverse removal procedure, noting the following points.

Check detective area of wheel speed sensor (1) is not covered with iron powder.
Tighten wheel sensor bolt (2) to specified torque.
Tightening torque

Front wheel speed sensor bolt (a): 11 N.m (110 kg-m, 8.5 lbf-ft)
Confirm that there is no space between front wheel speed sensor and steering knuckle (3).

Fig 1: Identifying Front Wheel Speed Sensor Gap
Courtesy of SUZUKI OF AMERICA CORP.
Install wheel, see WHEEL (WITH TIRE) REMOVAL AND INSTALLATION .