FixVault
Home › Suzuki › 2013 › Kizashi Base, Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 90 (Power Assisted Steering System) › Diagnostic Information and Procedures › DTC C1160: Control Module Programming Error › DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push engine switch to change ignition mode of keyless push start system to "ON".
  2. Push engine switch to change ignition mode to "OFF".
  3. Push engine switch to change ignition mode to "ON".
About FixVault