FixVault
Home › Tesla › 2012 › Model S › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Electrical System -- Model S › 12V Battery And Fuses › Disconnect 12V Power › 1st Generation Dual Motor › Disconnect

1st Generation Dual Motor: Disconnect

  1. Open the front trunk.
  2. If the vehicle is charging, remove the charge cable.
  3. On touchscreen, power off the climate control system, and wait at least 30 seconds for the climate control system to completely shut down.
  4. Make sure the vehicle is in Park.
  5. Fully lower all door windows to avoid glass shatter and door lockout conditions.
  6. Remove the underhood storage unit. See Underhood Storage Unit (Remove and Install) .
  7. Unlatch the driver's door and any door that might need to be opened during the service procedure.
  8. Turn off vehicle power from the touchscreen by touching Controls > E-brake & Power Off > Power off  .
  9. Disconnect the 12V battery ground connection (torque 5 N.m).
    G15032941Courtesy of TESLA, INC.
  10. Disconnect the first responder loop (X536). Do not cut the loop.
    G15032942Courtesy of TESLA, INC.
  11. Wait at least 2 minutes for all electrical circuits to fully discharge.
    WARNING: Before working on any high voltage components, perform the Electrical Isolation Procedure, refer to VEHICLE ELECTRICAL ISOLATION PROCEDURE .
About FixVault