Drive Cycle Calibration - Forward Facing Camera: Calibration

Connect a laptop with Toolbox 2.0 or later to the vehicle.
On the touchscreen, touch Controls (vehicle icon), and then touch the Software tab to display the vehicle firmware version.
Verify that the vehicle firmware version is 1.67.80 or later, and update if necessary.
NOTE: Update the vehicle firmware. See Firmware Update .
In Toolbox, select Panels > Driver Assist > Camera Calibration .
Click the Start/Play button.
Follow the onscreen instructions to calibrate the forward facing camera.
WARNING: Perform the calibration procedure in a suitable location and comply with all local traffic safety laws.

NOTE: Have an assistant monitor Toolbox during the drive cycle.