FixVault
Home › Tesla › 2021 › Model S Performance › Repair and Diagnosis › External Pages › Different car › Section 24 (Maintenance, Inspection And Service -- Model Y) › Service Mode › Toolbox 3 - Connect and Disconnect › Complete Connect

Complete Connect

WARNING: This page is about a different car, the 2024 Tesla Model Y, 2023 Tesla Model Y, 2022 Tesla Model Y, 2021 Tesla Model Y, and 2020 Tesla Model Y. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the condition of the connectors of the laptop with Toolbox 3, the vehicle interface cable, and the vehicle interface connector.
    NOTE: If the vehicle interface cable is damaged in any way, do not use it.
  2. Open the LH front door.
  3. Connect the vehicle interface cable to the laptop and to the vehicle interface connector located in the LH footwell.
    NOTE: Perform a push-pull-push check of each of the connections.
    G14841190Courtesy of TESLA, INC.
  4. If powered off, press the brake pedal to power on the vehicle drive rails.
  5. If powered off, power on the laptop, sign in and open a web browser to the Toolbox 3 website.
  6. In Toolbox 3, click the grey circle in the upper right corner to open the connection window.
  7. From the drop-down, select Connect Locally  , and then click Connect  .
    NOTE: When the connection is successfully established, the grey circle becomes green.
    G00632995Courtesy of TESLA, INC.
  8. Click the green circle to close the connection window.
  9. Return to the procedure that required a laptop with Toolbox 3 connection to the vehicle.
About FixVault