FixVault
Home › Tesla › 2021 › Model S Performance › Repair and Diagnosis › External Pages › Different car › Section 47 (Electrical System -- Model S) › Accelerator Pedal › Accelerator - Remove And Replace › Removal

Accelerator - Remove And Replace: Removal

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's footwell cover assembly. See Assembly - Cover - Footwell - Driver's (Remove and Replace) .
  2. Disconnect the harness connector from the top of the accelerator pedal assembly.
    G15035223Courtesy of TESLA, INC.
  3. Remove the nuts (x2) that secure the accelerator pedal assembly to the mounting bracket (torque 9 N.m).
    G15035224Courtesy of TESLA, INC.
  4. Release the accelerator pedal assembly from the mounting bracket.
  5. Remove the accelerator pedal assembly from the vehicle.
About FixVault