FixVault
Home › Tesla › 2021 › Model S Performance › Repair and Diagnosis › External Pages › Different car › Section 6 (Suspension -- Model 3) › Alignment Adjustment › Four Wheel Alignment Check and Adjust › Adjust Rear Toe

Adjust Rear Toe

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the rear toe is within specification and does not require adjustment, adjust the front camber and caster. See ADJUST FRONT CAMBER AND CASTER .
  2. Loosen the nut on the rear LH toe link to subframe bolt.
    G14748926Courtesy of TESLA, INC.
  3. Rotate the rear LH toe link to subframe bolt to adjust the rear LH toe to specifications. See WHEEL ALIGNMENT .
    • To add positive toe in, move the link in toward the centerline.
    • To add negative toe out, move the link out from the centerline.
  4. When the rear LH toe is correct, tighten the nut.

    85 N.m (62.7 ft-lbs) 

  5. Perform step  2 through step  4 for the RH side of the vehicle if necessary.
  6. Adjust the front camber and caster. See ADJUST FRONT CAMBER AND CASTER .
About FixVault