Fuel Injected Models
- Engine must be at normal operating temperature. Unplug fuel injection solenoid resistor wire connector. Solenoid resistor is located on the front of the left shock tower on Camry and Starlet models.
- Remove spark plugs and coil wire. Ground coil wire. Check compression with throttle wide open and at cranking speed.
COMPRESSION SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Compression Ratio | ||
| Camry | 8.6:1 | |
| Starlet | 9.5:1 | |
| Normal Compression Pressure | ||
| Camry | 171 psi (12.0 kg/cm2 ) | |
| Starlet | 185 psi (13.0 kg/cm2 ) | |
| Min. Compression Pressure | 128 psi (9.0 kg/cm2 ) | |
| Max. Variation Between Cylinders | 14 psi (1.0 kg/cm2 ) | |