FixVault
Home › Toyota › 1985 › Land Cruiser › Repair and Diagnosis › Engine Performance › System › High Altitude Compensation System › System Testing › Low Altitude

Low Altitude

  1. Warm up engine and disconnect vacuum hose between HAC valve and distributor at HAC valve side, and plug hose end. Disconnect vacuum hose from distributor sub-diaphragm, and plug hose end.
  2. Check ignition timing. Timing should be 5° BTDC. Reconnect hose to distributor sub-diaphragm. Check ignition timing. Timing should be about 13° BTDC.
  3. Disconnect vacuum hose from check valve at Black side and plug hose end. Check that ignition timing remains stationary for more than 1 minute. If timing changes, replace check valve. Stop engine and reconnect hoses to proper location.
  4. Disconnect 2 hoses on top of HAC valve. Blow air into each hose and verify that air flows into carburetor. Reconnect hoses to proper locations.
About FixVault