Alignment Specifications
WARNING: This page is about a different car, the 1986 Toyota Supra. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| 1986 Models | ||||
| Front | ||||
| Camber in Degrees | ||||
| Fraction | 7/8 +/- 1/2 | |||
| Decimal | .88 +/- .5 | |||
| Caster in Degrees | ||||
| Fraction | 4 3/16 +/- 1/2 | |||
| Decimal | 4.19 +/- .5 | |||
| Toe-In in Inches | ||||
| Fraction | 1/8 +/- 1/32 | |||
| Decimal | .13 +/- .03 | |||
| Toe-In in Degrees | ||||
| Fraction | 1/4 +/- 1/16 | |||
| Decimal | .25 +/- .06 | |||
| Toe-Out in Turns | ||||
| Inner | 37 9/16° | |||
| Outer | 30 3/4° | |||
| Steering Axis Inclination (SAI) | 9 1/8° | |||
| Rear (See Figure) | ||||
| Camber in Degrees | ||||
| Fraction | -5/32 +/- 1/2 | |||
| Decimal | -.16 +/- .5 | |||
| Toe-In in Inches | ||||
| Fraction | 0 +/- 3/32 | |||
| Decimal | 0.0 +/- .09 | |||
| Toe-In in Degrees | ||||
| Fraction | 0 +/- 3/16 | |||
| Decimal | 0.0 +/- .19 | |||
| 1986 1/2 | ||||
| Front | ||||
| Camber in Degrees | ||||
| Fraction | -1/13 +/- 3/4 | |||
| Decimal | -.06 +/- .75 | |||
| Caster in Degrees | ||||
| Fraction | 7 1/2 +/- 3/4 | |||
| Decimal | 7.5 +/- .75 | |||
| Toe-In in Inches | ||||
| Fraction | 0 +/- 5/34 | |||
| Decimal | 0.0 +/- .08 | |||
| Toe-Out in Turns | ||||
| Inner | 21° | |||
| Outer | 20° | |||
| Steering Axis Inclination (SAI) | 10 1/2° | |||
| Rear | ||||
| Camber in Degrees | ||||
| Fraction | -1/4 +/- 3/4 | |||
| Decimal | -.25 +/- .75 | |||
| Toe-In in Inches | ||||
| Fraction | 1/8 +/- 5/34 | |||
| Decimal | .12 +/- .08 | |||