Pick-Up Coil Air Gap Check

Using a flat, non-magnetic feeler gauge, check air gap between signal rotor and pick-up coil projection. See:
- Fig. Fig 1 for Corolla & Tercel.
- Fig. Fig 2 for Pickup.
Air gap should be within specification. See the PICK-UP COIL ADJUSTMENT table. If not, adjust air gap on Corolla models. On Pickup and Tercel, the non-adjustable pick-up coil must be replaced.

PICK-UP COIL ADJUSTMENT

Application

INCH (mm)

Corolla

⁽¹⁾ .008-.016 (.20-.40)

Tercel & Pickup

⁽²⁾ .008-.016 (.20-.40)

⁽¹⁾	Adjust pick-up coil if not within specification.

⁽²⁾	Replace pick-up coil if not within specification.

Fig 1: Checking Pick-Up Coil Air Gap - Corolla & Tercel

Fig 2: Checking Pick-Up Coil Air Gap - Pickup