Pick-Up Coil Air Gap Check

1. Using a flat, non-magnetic feeler gauge, check air gap between signal rotor and pick-up coil projection. See Fig 1 and Fig 2 .
2. Air gap should be within specification. See PICK-UP COIL ADJUSTMENT  table. If air gap is not within specification, replace distributor.

PICK-UP COIL ADJUSTMENT

Application	INCH (mm)
All Models	.008-.016 (.20-.40)

Fig 1: Checking V6 Pick-Up Coil Air Gap

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Checking 4-Cylinder Pick-Up Coil Air Gap

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002