All Models
- Remove air cleaner. Check throttle cable bracket and linkage for looseness or bending. Depress accelerator to wide open throttle position.
- Adjust cable housing so distance between rubber boot end and inner cable stopper or paint mark is .04" (1.0 mm). See Fig 1. Tighten lock nut.
- For new throttle cables, stopper or paint mark will not be in place. With new cable securely installed in transmission, pull inner cable slightly until resistance is felt. See Fig 2. Stake new stopper or paint a mark as shown.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002