Ecu Terminal Identification

CAUTION: Perform all voltage measurements with ECU harness connector installed. Use a high-impedance DVOM (10,000-ohm minimum). Verify battery voltage is greater than 11 volts.

Fig 1: ECU Terminal Identification (Pickup 2WD)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: ECU Terminal Identification (Pickup 4WD A/T)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: ECU Terminal Identification (Pickup 4WD M/T)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 4: ECU Terminal Identification (4Runner 4WD M/T & 2WD)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 5: ECU Terminal Identification (4Runner 4WD A/T)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002