ABS Computer Wiring Harness

Remove ABS computer. See ABS COMPUTER under REMOVAL & INSTALLATION. With ABS computer connector connected, backprobe ABS computer connector terminals. Measure voltage between indicated terminal and body ground. See Fig 1. If any circuit does not test as specified, check and repair or replace indicated trouble part.
Disconnect ABS computer connectors. Check resistance and voltage, on wire harness side, between indicated terminals of ABS computer connector. See Fig 2. If any circuit does not test as specified, check and repair or replace indicated troubled part.

Fig 1: Testing ABS Computer Wiring Harness (1 Of 2)

Fig 2: Testing ABS Computer Wiring Harness (2 Of 2)