FixVault
Home › Toyota › 1992 › Celica All-Trac › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls - Remove/Install/Overhaul › Air Induction System › Turbocharger › Installation

Air Induction System: Turbocharger: Installation

  1. To install, reverse removal procedure. Use NEW gaskets and "O" rings. Tighten all bolts and nuts to specification. See appropriate TORQUE SPECIFICATIONS  table.
  2. After installing turbocharger and before installing intercooler air duct, using appropriate funnel, slowly pour one ounce (30 cc) of clean oil into turbo oil inlet. Turn impeller wheel shaft by hand to circulate oil onto bearings. Complete installation and fill cooling system. Check engine oil level.
About FixVault