FixVault
Home › Toyota › 1992 › Land Cruiser › Repair and Diagnosis › Body & Frame › Power Windows › Component Tests › Power Window Motor › Driver Door Circuit Breaker

Driver Door Circuit Breaker

  1. Disconnect the connector from the master switch.
  2. Connect the positive (+) lead from the battery to terminal No. 6 and the negative (-) lead to terminal No. 13 on the wire harness side. Raise the window to fully closed position.
  3. Continue to apply voltage. Check that there is a circuit breaker operation noise within approximately 4-40 seconds.
  4. Reverse the polarity, and check that the window begins to descend within approximately 60 seconds. If operation is not as specified, replace the motor.
About FixVault