FixVault

Cooling System Specifications

ENGINE COOLING SYSTEM SPECIFICATIONS (4-CYLINDER)

Application Specification
Coolant Replacement Interval
First Service 45,000 Miles Or 36 Months
Subsequent Servicing 30,000 Miles Or 24 Months
Coolant Capacity
Camry 6.7 Qts. (6.3L)
Celica
3S-GTE 6.9 Qts. (6.5L)
4A-FE
A/T 5.9 Qts. (5.6L)
M/T 5.5 Qts. (5.2L)
5S-FE
A/T 6.4 Qts. (6.1L)
M/T 6.6 Qts. (6.2L)
Corolla
A/T 6.4 Qts. (6.1L)
M/T 6.5 Qts. (6.2L)
MR2
3S-GTE 14.4 Qts. (13.6L)
5S-FE 13.7 Qts. (13.0L)
Paseo
A/T 5.7 Qts. (5.4L)
M/T 5.3 Qts. (5.0L)
Pickup & 4Runner
Except 4WD A/T 8.9 Qts. (8.4L)
4WD A/T 9.6 Qts. (9.1L)
Previa 12.3 Qts. (11.6L)
Tercel
A/T 5.7 Qts. (5.4L)
M/T 5.2 Qts. (4.9L)
Pressure Cap Standard Opening Pressure 10.7-14.9 psi
Thermostat Opens (1)
Camry, Celica, Corolla, MR2, Paseo, Previa & Tercel 176-183°F (80-84°C)
Pickup & 4Runner 187-194°F (86-90°C)
(1) If thermostat is equipped with a "jiggle valve" on its flange, install "jiggle valve" properly. On Camry, Celica, MR2, Paseo, Previa and Tercel, align "jiggle valve" with protrusion on thermostat housing. On Corolla, align "jiggle valve" with stud bolt or above water inlet housing.
ENGINE COOLING SYSTEM SPECIFICATIONS (6-CYLINDER & V6)

Application Specification
Coolant Replacement Interval
First Service 45,000 Miles Or 36 Months
Subsequent Servicing 30,000 Miles Or 24 Months
Coolant Capacity
Camry
A/T 8.0 Qts. (8.4L)
M/T 9.0 Qts. (8.5L)
Cressida 8.8 Qts. (8.3L)
Land Cruiser
With Rear Heater 20.6 Qts. (19.5L)
Without Rear Heater 18.5 Qts. (17.5L)
Pickup & 4Runner
A/T 10.9 Qts. (10.3L)
M/T 11.1 Qts. (10.5L)
Supra 8.6 Qts. (8.1L)
Pressure Cap Standard Opening Pressure 10.7-14.9 psi
`Thermostat Opens (1)
Camry, Pickup & 4Runner 176-183°F (80-84°C)
Cressida, Land Cruiser & Supra 187-194°F (86-90°C)
(1) If thermostat is equipped with a "jiggle valve" on its flange, ensure "jiggle valve" is installed at 12 o'clock (straight-up) position. This applies to engines where thermostat flange is vertical when installed.