FixVault
Home › Toyota › 1993 › Celica All-Trac › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls - Remove/Install/Overhaul › Air Induction System › Turbocharger › Installation

Air Induction System: Turbocharger: Installation

  1. To install turbocharger, reverse removal procedure. Use NEW gaskets and "O" rings. Tighten all bolts and nuts to specification. See TORQUE SPECIFICATIONS .
  2. After installing turbocharger and before installing intercooler air duct, using a funnel, slowly pour one ounce (30 cc) of clean oil into turbo oil inlet. Turn impeller wheel shaft by hand to circulate oil onto bearings. Complete installation procedures and fill cooling system. Check engine oil level. Start engine and check for leaks.
About FixVault