Power Window SW Continuity Test (Passenger Side & Rear SW'S)
Using an ohmmeter, check continuity between specified terminals with power window switch in specified position. See PWR WINDOW SW CONTINUITY TEST (PASSENGER SIDE & REAR) table. See Fig 1. If continuity does not exist at specified terminals, replace appropriate power window switch.
PWR WINDOW SW CONTINUITY TEST (PASSENGER SIDE & REAR)
| Application & Position | (1) Terminal No. | ||
|---|---|---|---|
| UP | 1 & 5; 3 & 4 | ||
| OFF | 1 & 2; 3 & 4 | ||
| DOWN | 1 & 2; 4 & 5 | ||
|
|||