Ignition Switch
Disconnect ignition switch connector. With ignition switch in specified position, check continuity between specified terminals of ignition switch connector. See IGNITION SWITCH CONTINUITY TEST table. See Fig 1. If continuity is not as specified, replace ignition switch.
IGNITION SWITCH CONTINUITY TEST
| Application/Position | Terminals (1) | Continuity? | ||
|---|---|---|---|---|
| Lock | 1, 2, 3, 4, 5, 7 & 8 | No | ||
| Accessory | 5 & 7 | Yes | ||
| On | 2 & 3; 4, 5 & 7 | Yes | ||
| Start | 1, 2 & 3; 4, 7 & 8 | Yes | ||
|
||||