Rear Wiper Switch Test
With wiper switch in specified position, ensure continuity exists between terminals listed. See REAR WIPER/WASHER SWITCH CONTINUITY TEST table. See Figure. Replace complete wiper switch if continuity is not as specified.
REAR WIPER/WASHER SWITCH CONTINUITY TEST
| Switch Position | Terminals | Continuity | |
|---|---|---|---|
| Off | B1, B2, B10, B16 | No | |
| Intermittent | B10 & B16 | Yes | |
| On | B1 & B16 | Yes | |
| Wash | |||
| W/Wiper On | B2 & B16 | Yes | |
| W/Intermittent On | B1, B2 & B16 | Yes | |