FixVault
Home › Toyota › 1994 › MR2 2.2 S, Automatic › Repair and Diagnosis (Single Page) › Engine Performance › Remove, Overhaul & Install › Engine Controls - Remove/Install/Overhaul › Ignition System › Distributor › Overhaul

Ignition System: Distributor: Overhaul

  1. On 3S-GTE, distributor cap and rotor are serviceable. Pick-up coil and distributor housing assembly are replaced as a unit.
  2. On 5S-FE, only ignition coil, condenser, rotor and distributor harness connector are serviceable. Pick-up coil and distributor housing assembly are replaced as a unit. When replacing ignition coil, ensure seal packing is applied to housing-to-coil contact surface. When installing coil wires, ensure wires are properly inserted into grooves on side of coil.
About FixVault