FixVault
Home › Toyota › 1994 › T100 Base › Repair and Diagnosis (Single Page) › Drivelines & Axles › Differentials & Drive Axles › Drive Axle - Automatic Disconnecting › Component Testing › Add Indicator Switch

Add Indicator Switch

  1. Remove ADD indicator switch. See ADD INDICATOR SWITCH  under REMOVAL & INSTALLATION. Fully depress pin on end of ADD indicator switch. Using ohmmeter, ensure continuity exists between electrical terminals on ADD indicator switch with pin depressed.
  2. Release pin of end of ADD indicator switch. Ensure no continuity now exists between electrical terminals on ADD indicator switch. Replace ADD switch if defective.
About FixVault