FixVault
Home › Toyota › 1995 › MR2 2.0 S › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls - Remove/Install/Overhaul - 2.0L Turbo › Ignition System › Distributor › Removal

Ignition System: Distributor: Removal

  1. Remove passenger's side hood panel. Remove air intake hose for access to distributor. Disconnect electrical connector at distributor.
  2. Disconnect ignition coil wire from ignition coil. Disconnect spark plug wires from spark plugs. Remove distributor hold-down bolts and distributor. Remove "O" ring from distributor housing.
About FixVault