FixVault
Home › Toyota › 1995 › Pickup Base › Repair and Diagnosis (Single Page) › Engine Performance › Remove, Overhaul & Install › Engine Controls - Remove/Install/Overhaul - 2.4L › Fuel System › Cold Start Injector › Installation

Cold Start Injector: Installation

  1. To install, reverse removal procedure using NEW gaskets. Tighten cold start injector bolts and union bolts for cold start injector fuel pipe to specification. See TORQUE SPECIFICATIONS .
  2. Operate fuel pump and check for fuel leaks. See FUEL PUMP OPERATION under FUEL SYSTEM in BASIC TESTING - 2.4L article.
About FixVault