Ignition Coil (DISTRIBUTORLESS Ignition System): Installation

WARNING: This page is about a different variant/trim than selected.

To install, reverse removal procedure. Tighten bolt to specification. See TORQUE SPECIFICATIONS table.
When installing spark plug wire on ignition coil, ensure spline on ignition coil is aligned with spline on holder and install spark plug wire. Ensure holder is properly positioned on grommet and ignition coil. See Fig 2. Lightly pull upward on holder to ensure lock claw is locked in place.

Fig 1: Releasing Lock Claw On Spark Plug Wire

Fig 2: Holder ID, Grommet & Checking Holder, & Grommet Installation