FixVault
Home › Toyota › 1996 › Paseo Automatic › Repair and Diagnosis › Electrical › Starter › Starting System › On-Vehicle Testing › Starter Relay Test › 1995

Starter Relay Test: 1995

  1. Locate and remove starter relay. See STARTER RELAY LOCATION  table. Using ohmmeter, verify continuity between relay terminals No. 1 and 3. See Figure. Continuity should not exist between terminals No. 2 and 4. If continuity is not as indicated, replace relay.
  2. Check relay operation by applying battery voltage through terminals No. 1 and 3. See Figure. Continuity should now exist between terminals No. 2 and 4. If relay does not test as indicated, replace relay.
About FixVault