Disassembly & Reassembly
- Remove wiring harness from fuel pump and fuel pump mounting bracket. See Figure. Disconnect electrical connector for fuel gauge sending unit from fuel pump mounting bracket. Remove screws and fuel gauge sending unit from fuel pump mounting bracket.
- Remove bolt and disconnect ground strap from fuel pump clamp. See Figure. Remove bolt and fuel pump clamp. Pull bottom of fuel pump from fuel pump mounting bracket.
- Remove rubber cushion from bottom of fuel pump. Disconnect fuel hose from top of fuel pump. Remove fuel pump. Using small screwdriver, remove retaining clip that holds fuel filter on bottom of fuel pump. Remove fuel filter from bottom of fuel pump.
- To remove fuel filter from fuel pressure regulator, remove fuel filter-to-fuel pressure regulator retaining screw. Remove fuel filter with "O" ring from fuel pressure regulator.
- To reassemble, reverse disassembly procedure using NEW "O" ring on fuel filter and NEW retaining clip on fuel filter. Tighten fuel filter-to-fuel pressure regulator retaining screw, ground strap-to-fuel pump clamp bolt and fuel pump clamp bolt to specification. See TORQUE SPECIFICATIONS .
- Disconnect electrical connector for fuel gauge sending unit from fuel pump mounting bracket. See Figure. Remove screws and fuel gauge sending unit from fuel pump mounting bracket.
- Disconnect electrical connectors for wiring harness at fuel pump. Pull bottom of fuel pump from fuel pump mounting bracket. Remove rubber cushion from bottom of fuel pump. Disconnect fuel hose from top of fuel pump. Remove fuel pump from the fuel pump mounting bracket.
- Using small screwdriver, remove retaining clip that holds fuel filter on bottom of fuel pump. Remove fuel filter from bottom of fuel pump. To reassemble, reverse disassembly procedure using NEW retaining clip on fuel filter.