FixVault

Taillight Relay

  1. Remove taillight (control) relay from driver's side fuse/relay box located near driver's side kick panel. See Figure.
  2. Note terminal identification on taillight relay. See Fig 1. Using DVOM, check that continuity exists between terminals No. 1 and 2 on taillight relay. Apply battery voltage and ground to terminals No. 1 and 2 on taillight relay. Also, check that continuity exists between terminals No. 3 and 5 on taillight relay. Replace taillight relay if defective.
Fig 1: Identifying Taillight Relay Terminals
G98H12119Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002