Camry Solara

Disconnect driver's power window master switch harness connector. Set window lock switch to UNLOCK position. Connect 30-amp fused jumper between 12-volt battery positive terminal and terminal No. 9 (Blue wire) at driver's power window master switch. See Figure. Connect another jumper between battery negative terminal and terminal No. 1 (White/Black wire) at driver's power window master switch. Ensure all switches illuminate. Set window lock switch to LOCK position. Ensure all switch illumination goes out. If operation is not as specified, replace driver's power window master switch. See POWER WINDOW SWITCH  under REMOVAL & INSTALLATION. If operation is as specified, driver's power window master switch is okay.