Oil Pump: Reassembly

WARNING: This page is about a different car, the 2004 Toyota MR2, 2003 Toyota MR2, and 2002 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL DRIVE AND DRIVEN ROTORS
1. Place the drive and driven rotors into pump body with the marks facing the pump body cover side.
  
  Fig 1: Installing Rotors With Marks Facing Up
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the pump body cover with the 3 screws.
Torque: 10.3 N.m (105 kgf.cm, 8 ft.lbf)
INSTALL RELIEF VALVE
Insert the relief valve and spring into the pump body hole, and install the plug.

Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)