FixVault

Remote Arming And Disarming

To ARM the system: 

Press and release the top (primary) REMOTE CONTROL button once: 

The PIEZO "CHIRPER" will chirp once.

The exterior (tail/marker) lights will flash once.

The interior lights will turn on for 3 seconds (as long as the dome light switch is set to the "DOOR" position  ).

The doors will lock (if the vehicle is equipped with power locks  ).

Fig 1: Pressing Top (Primary) Remote Control Button Once
G06741847Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

To DISARM the system: 

Press and release the top REMOTE CONTROL button once  again:

The PIEZO "CHIRPER" will chirp twice.

The exterior (tail/marker) lights will flash twice.

The interior lights will turn on for 30 seconds or until the doors are closed (as long as the dome light switch is set to the "DOOR" position).  The doors will unlock (if the vehicle is equipped with power locks). 

Fig 2: Pressing Top (Primary) Remote Control Button Once
G06741848Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NOTE: The PIEZO OPERATION MODE is factory preset to "ON".