FixVault
Home › Toyota › 2001 › 4Runner Base › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Back Door Control System - Diagnostics › Circuit Inspection › Rear Wiper Limit Switch Circuit › Inspection Procedure

Inspection Procedure

  1. Check rear wiper motor continuity ( ). 
    1. NG: Replace rear wiper motor. 
    2. OK: Go to next step. 
  2. Check harness and connector between rear wiper motor and back door ECU ( ). 
    1. NG: Repair or replace harness or connector. 
    2. OK: Proceed to next circuit inspection shown on problem symptoms table (See  PROBLEM SYMPTOMS TABLE  ). 
About FixVault