FixVault
Home › Toyota › 2001 › 4Runner Base › Repair and Diagnosis › External Pages › Different car › Section 341 (Body Control Systems - Diagnostics) › Circuit Inspection › Key Unlock Warning Switch Circuit › Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2002 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check key unlock warning switch. See  INSPECTION  . 
    1. NG Replace key unlock warning switch. 
    2. OK Go to next step 
  2. CHECK HARNESS AND CONNECTOR BETWEEN KEY UNLOCK WARNING SWITCH AND BODY ECU  . 
    1. NG Repair or replace harness or connector. 
    2. OK Proceed to next circuit inspection shown on problem symptoms table. See  PROBLEM SYMPTOMS TABLE  . 
About FixVault