Cruise Control Function Test: Notes

NOTE: Before performing CRUISE CONTROL FUNCTION TEST, perform DIAGNOSTIC PROCEDURE under SELF-DIAGNOSTIC SYSTEM. Cruise control function test should only be performed if no self-diagnostic trouble codes are present.

Cruise control function test is used to help determine if cruise control circuits are functioning properly when no trouble codes are present. To activate function test, turn ignition on. Move cruise control switch to SET/COAST or RES/ACC position and hold. Depress cruise ON-OFF (main) button to ON position. Verify CRUISE indicator light comes on and flashes 2 or 3 times repeatedly, after 3 seconds. Release cruise control switch from SET/COAST or RES/ACC position. Activate each switch circuit in order given. Verify normal function code is displayed by CRUISE indicator light, as each of the following circuits is activated.