FixVault
Home › Toyota › 2002 › 4Runner Base › Repair and Diagnosis › Body & Frame › Door Locks › Back Door Control System › Circuit Inspection › Rear Wiper Limit Switch Circuit › Inspection Procedure

Inspection Procedure

  1. Check rear wiper motor continuity. See  WINDOWS  . 
    1. NG: Replace rear wiper motor. 
    2. OK: Go to next step 
  2. Check  HARNESS AND CONNECTOR BETWEEN REAR WIPER MOTOR AND BACK DOOR ECU  . 
    1. NG: Repair or replace harness or connector. 
    2. OK: Proceed to next circuit inspection shown on problem symptoms table. See  PROBLEM SYMPTOMS TABLES  . 
About FixVault