FixVault
Home › Toyota › 2002 › 4Runner Base › Repair and Diagnosis › External Pages › Different car › Section 264 (Body Control Systems - Diagnostics) › Circuit Inspection › Power Window Control Switch Circuit › Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2002 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check power window control switch. See  INSPECTION  . 
    1. OK: Go to next step.
    2. NG: Replace power window control switch.
  2. Check harness and connector between power window control switch and body ECU. 
    1. OK: Proceed to next circuit inspection shown in PROBLEM SYMPTOMS .
    2. NG: Repair or replace harness or connector.
About FixVault