FixVault
Home › Toyota › 2002 › Land Cruiser › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Power Main Relay Circuit › Inspection Procedure

Inspection Procedure

  1. Check power main relay (See  INSPECTION  ). 
    1. OK: Go to next step.
    2. NG: Replace the power main relay.
  2. Check wire harness and connector between power main relay and Body ECU, battery and power main relay  .
    1. OK: Proceed to next circuit inspection shown on problem symptoms table (See PROBLEM SYMPTOMS TABLE ).
    2. NG: Repair or replace wire harness or connector.
About FixVault