FixVault
Home › Toyota › 2002 › MR2 C56 › Repair and Diagnosis (Single Page) › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Power Window Control Switch Circuit › Inspection Procedure

Inspection Procedure

  1. Check power window control switch. See  INSPECTION  . 
    1. OK: Go to next step.
    2. NG: Replace power window control switch.
  2. Check harness and connector between power window control switch and body ECU. 
    1. OK: Proceed to next circuit inspection shown in PROBLEM SYMPTOMS .
    2. NG: Repair or replace harness or connector.
About FixVault