FixVault
Home › Toyota › 2002 › MR2 C56M › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Door Unlock Detection Switch Circuit › Inspection Procedure

Inspection Procedure

  1. Check door unlock detection switch.  See steps 4 and 5 under INSPECTION .
    1. OK: Go to next step.
    2. NG: Replace door unlock detection switch.
  2. Check harness and connector between door unlock detection switch and body ECU. 
    1. OK: Proceed to next circuit inspection shown in PROBLEM SYMPTOMS .
    2. NG: Repair or replace harness or connector.
About FixVault