FixVault
Home › Toyota › 2002 › Sequoia Limited, 4WD › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Front Fog Light Relay Circuit › Inspection Procedure

Inspection Procedure

  1. Check front fog light relay  . See step 2  of INSPECTION .
    1. NG  : Replace the front fog light relay.
    2. OK  : Go to step  2.
  2. Check wire harness and connector between front fog light relay and Body ECU  . See HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS .
    1. NG  : Repair or replace wire harness or connector.
    2. OK  : Proceed to next circuit inspection shown in problem symptoms. See PROBLEM SYMPTOMS .
About FixVault