FixVault
Home › Toyota › 2002 › Sequoia Limited, 4WD › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Rear Power Window Switch Circuit › Inspection Procedure

Inspection Procedure

  1. Check the power window switch  . See step 2  of INSPECTION .
    1. NG  : Replace the power window switch.
    2. OK  : Go to step  2.
  2. Check wire harness and connector between power window switch and Body ECU  . See HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS .
    1. NG  : Repair or replace wire harness or connector.
    2. OK  : Proceed to next circuit inspection shown in problem symptoms. See PROBLEM SYMPTOMS .
About FixVault