FixVault
Home › Toyota › 2002 › Sequoia Limited, RWD › Repair and Diagnosis › Engine Performance › Engine Ignition System › Crankshaft Position Sensor › Removal

Crankshaft Position Sensor: Removal

  1. Remove engine under cover  .
  2. Remove crankshaft position sensor  :
    1. Disconnect the crankshaft position sensor connector.
    2. Remove the bolt and crankshaft position sensor.
    Fig 1: Locating Crankshaft Position Sensor Bolt
    G01128564Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault