FixVault
Home › Toyota › 2002 › Sienna LE › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Horn Circuit › Inspection Procedure

Inspection Procedure

  1. Check Horn. 
    1. NG: Replace the horn. 
    2. OK: Go to next step. 
  2. Check Wire Harness And Connector Between Horn Relay And Body ECU, Battery And Horn Relay. 
    1. NG: Repair or replace wire harness or connector. 
    2. OK: Proceed to next circuit inspection shown on problem symptoms table. See  PROBLEM SYMPTOMS TABLES  . 
About FixVault