FixVault
Home › Toyota › 2002 › Sienna XLE › Repair and Diagnosis (Single Page) › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Light Control Switch Circuit › Inspection Procedure

Inspection Procedure

  1. Check Headlight Control Switch. 
    1. NG: Replace the headlight control switch. 
    2. OK: Go to next step. 
  2. Check Wire Harness And Connector Between Headlight Control Switch And Body ECU. See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  . 
    1. NG: Repair or replace wire harness or connector. 
    2. OK: Proceed to next circuit inspection shown on problem symptoms table. See  PROBLEM SYMPTOMS TABLES  . 
About FixVault