FixVault
Home › Toyota › 2002 › Sienna XLE › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Manual Door Lock Switch Circuit › Inspection Procedure

Inspection Procedure

  1. Check Door Lock Control Switch. See Step 1 Or 2 Of  INSPECTION  in POWER DOOR LOCK CONTROL SYSTEM. 
    1. NG: Replace the door lock control switch. 
    2. OK: Go to next step. 
  2. Check Wire Harness And Connector Between Door Lock Control Switch And Body Ground. See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  . 
    1. NG: Repair or replace wire harness or connector. 
    2. OK: Proceed to next circuit inspection shown on problem symptoms table. See  PROBLEM SYMPTOMS TABLES  . 
About FixVault